Advertisement
TUONO V4 R a-PRC ABS
•
Tap lightly on the wheel pin to extract
the head of the housing.
•
Rotate the wheel forwards and disen-
gage the drive chain from the sprocket.
•
Remove the wheel pin together with
the right chain guide pad.
•
Remove the complete wheel freeing
the disc from the brake calliper.
•
Holding the outer rim of the sprocket with both hands, slide off the final transmission unit by
pulling it parallel to the wheel axis.
OPERATE WITH CAUTION. IF THE FINAL TRANSMISSION UNIT IS INSTALLED ON THE FLEXI-
BLE COUPLING SUPPORT, DO NOT TURN OVER OR ROTATE THE REAR WHEEL SPROCKET
SIDE HORIZONTALLY, OR THE FINAL TRANSMISSION UNIT COULD SLIDE OUT AND FALL,
AND THE SPROCKET MAY GET DAMAGED.
CAUTION
DO NOT UNSCREW THE FIVE NUTS. THE FINAL TRANSMISSION UNIT CAN BE SLID OFF COM-
PLETELY FROM THE FLEXIBLE COUPLING SUPPORT.
•
Remove the final transmission unit.
CAUTION
THE FLEXIBLE COUPLINGS REMAIN FITTED ON THEIR
HOLDER.
•
Remove all the flexible couplings.
Suspensions
SUSP - 415
Advertisement
