Advertisement
TUONO V4 R a-PRC ABS
43.ELECTRONIC TRANSMISSION
44.SIDE STAND SWITCH
45.GEAR SENSOR
46.FRONT CYLINDER PRESSURE SENSOR
47.REAR CYLINDER PRESSURE SENSOR
48.FRONT CYLINDER THROTTLE
49.REAR CYLINDER THROTTLE
50.AIR TEMPERATURE SENSOR
51.WATER TEMPERATURE SENSOR
52.FALL SENSOR (OPTIONAL EQUIPMENT)
53.7SM CONTROL UNIT
54.HAND GRIP POSITION SENSOR
55.ENGINE SPEED SENSOR
56.COIL
57.SPARK PLUG
58.INJECTORS
59.SECONDARY AIR SYSTEM
60.LAMBDA PROBE
61.ABS FUSES
62.-
63.LEFT LIGHT SWITCH
64.INERTIA SENSOR PLATFORM
65.HIGH BEAM LIGHT RELAY
Checks and inspections
GENERAL NOTIONS FOR TROUBLESHOOTING ELECTRICAL FAULTS
THE SECTIONS RELATIVE TO THE ELECTRICAL SYSTEM CONTAIN DRAWINGS OF CONNEC-
TORS; NOTE THAT THE DRAWING ALWAYS DEPICT THE CONNECTOR/COMPONENT VIEWED
FROM THE WIRING HARNESS SIDE, I.E. FROM THE SIDE ON WHICH THE CABLES LEADING
FROM THE MAIN WIRING HARNESS ENTER THE CONNECTOR/COMPONENT.
CAUTION
BEFORE STARTING ANY TROUBLESHOOTING PROCEDURES ON THE VEHICLE, CHECK THAT
THE BATTERY VOLTAGE IS ABOVE 12V.
Electrical system
ELE SYS - 139
Advertisement
