Advertisement
TUONO V4 R a-PRC ABS
1. Clamp
2. Battery - engine ground cable
3. Engine - battery ground cable harness routing
•
The engine - battery ground cable harness must not be visible within the area indicated with
a red triangle
Back side
TABLE A - LICENSE PLATE FRAME PRE-FITTING
Check that the drainage hole (7) for the water of both turn indicators is positioned downward.
1. License plate frame cable harness
2. Right rear turn indicator cable harness routing
3. 2.8 mm (0.11 in) Faston - cable colours: red and blue
4. License plate light grey rubber ring
5. 2.8 mm (0.11 in) Faston - cable colours: light blue and blue
6. Left rear turn indicator cable harness routing
7. Breather
TABLE B - SPEED SENSOR PRE-FITTING
1. Speed sensor
2. Sensor fastener screw
3 Sensor cable harness routing in the cable grommet
Electrical system
ELE SYS - 119
Advertisement
