TUONO V4 R a-PRC ABS
•
Insert the retainer ring in its position.
•
Fit the dust gaiter with the specific tool.
Specific tooling
AP8140189 Tool for fitting oil seal for 43 mm
(1.69 in) diameter hole
AP8140146 Weight
•
Insert the pumping member pin in the
stem.
•
Using a hook spanner lock the pump-
ing member pin and tighten the fixing
screw on the fork end to the prescribed
torque.
Specific tooling
020889Y Wrench for locking pumping unit ring
nut
•
Insert the spring guide and lock it in place using the respective snap ring.
Suspensions
SUSP - 407