TUONO V4 R a-PRC ABS
TABLE E2 - ABS
1. Main cable harness
2. CHASSIS
•
Place the cable harness as indicated
and by using the appropriate screws
and clips fix it to the frame on the points
marked by the arrows.
TABLE E3 - ABS
1. Main cable harness
2. Cable grommet
•
Pass the cable harness through the ca-
ble grommet as indicated.
TABLE E4 - ABS
1. ABS control unit
2. ABS control unit connector
3. Main cable harness
4. Clamp
•
Connect the ABS control unit connec-
tor, place the cable harness as indica-
ted and with the clamp fix it to the
frame.
Electrical system
ELE SYS - 125