Installation Precautions; Warranty; Ce Declaration Of Conformity - Fema Electronica B Series User Manual

Impulse counters and ratemeters
Hide thumbs Also See for B Series:
Table of Contents

Advertisement

1.17 Installation precautions

Risk of electrical shock. Instrument terminals can be
connected to dangerous voltage.
Instrument conforms to CE rules and regulations.
This instrument has been designed and verified conforming to
the 61010-1 CE security regulation, for industrial applications.
Installation of this instrument must be performed by qualified
personnel only. This manual contains the appropriate informa-
tion for the installation. Using the instrument in ways not spec-
ified by the manufacturer may lead to a reduction of the speci-
fied protection level. Disconnect the instrument from power
before starting any maintenance and / or installation action.
The instrument does not have a general switch and will start
operation as soon as power is connected. The instrument does
not have protection fuse, the fuse must be added during instal-
lation.
An appropriate ventilation of the instrument must be assured.
Do not expose the instrument to excess of humidity. Maintain
clean by using a humid rag and do NOT use abrasive products
such as alcohols, solvents, etc.
General recommendations for electrical installations apply, and
for proper functionality we recommend : if possible, install the
instrument far from electrical noise or magnetic field genera-
tors such as power relays, electrical motors, speed variators, ...
If possible, do not install along the same conduits power cables
(power, motor controllers, electrovalves, ...) together with sig-
nal and/or control cables.
Before proceeding to the power connection, verify that the
voltage level available matches the power levels indicated in
the label on the instrument.
In case of fire, disconnect the instrument from the power line,
fire alarm according to local rules, disconnect the air condition-
ing, attack fire with carbonic snow, never with water.

1.18 Warranty

This instrument is warranted against all manufacturing
defects for a period of 24 MONTHS from the shipment
date. This warranty does not apply in case of misuse, ac-
cident or manipulation by non-authorized personnel. In
case of malfunction get in contact with your local provid-
er to arrange for repair. Within the warranty period and
after examination by the manufacturer, the unit will be
repaired or substituted when found to be defective. The
scope of this warranty is limited to the repair cost of the
instrument, not being the manufacturer eligible for re-
sponsibility on additional damages or costs.
FEMA ELECTRÓNICA . SERIES B . Models Bxx-C1

1.19 CE declaration of conformity

Manufacturer FEMA ELECTRÓNICA, S.A.
Altimira 14 - Pol. Ind. Santiga
E08210 - Barberà del Vallès
BARCELONA - SPAIN
www.fema.es - info@fema.es
Products
B24-C1, B44-C1, B26-C1, B46-C1
The manufacturer declares that the instruments indicated com-
ply with the directives and rules indicated below.
Electromagnetic compatibility directive 2014/30/EU
Low voltage directive 2014/65/EU
Directive ROHS 2011/65/EU
Directive WEEE 2012/19/EU
Security rules EN-61010-1:2010
Instrument
Fixed, Permanently connected
Pollution degree 1 and 2 (without condensation)
Isolation
Basic + Protective union
Electromagnetic compatibility rules EN-61326-1:2013
EM environment
Immunity levels
EN-61000-4-2 By contact ±4 KV
By air ±8 KV
EN-61000-4-3
EN-61000-4-4 On AC power lines: ±2 KV
On DC power lines: ±2 KV
On signal lines : ±1 KV
EN-61000-4-5 Between AC power lines ±1 KV
Between AC power lines and earth ±2 KV Criteria B
Between DC power lines ±1 KV
Between DC power lines and earth ±2 KV Criteria B
Between signal lines and earth ±1 KV
EN-61000-4-6
EN-61000-4-8 30 A/m at 50/60 Hz
EN-61000-4-11 0 % 1 cycle
40 % 10 cycles
70 % 25 cycles
0 % 250 cycles
Emission levels
CISPR 11
Instrument Class A, Group 1
Barberà del Vallès October 2020
Xavier Juncà - Product Manager
According to directive 2012/19/EU, electronic
equipment must be recycled in a selective and
controlled way at the end of its useful life.
Industrial
Criteria B
Criteria B
Criteria A
Criteria B
Criteria B
Criteria B
Criteria B
Criteria B
Criteria B
Criteria A
Criteria A
Criteria A
Criteria A
Criteria B
Criteria B
Criteria A
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-c1 seriesB24-c1B26-c1B44-c1B46-c1

Table of Contents