Table of Contents
Advertisement
1.13.26 'Password' function
Password
1.13.27 Default factory configuration
Factory
configuration
1.13.28 Firmware version
Version
1.13.29 Brightness configuration
Brightness
1.13.30 Access to the options configuration menu
Access to the optional module installed at slot 1
Option
1
Access to the optional module installed at slot 2
Option
2
Access to the optional module installed at slot 3
Option
3
Minimum
Standard
Maximum
FEMA ELECTRÓNICA . SERIES B . Models Bxx-C1
The password function blocks access to the configuration
menu. The 'fast access' menu is not affected by the password
function. This means that the configuration menu can be pass-
word blocked, while some configured functions or parameters
(setpoint values, preset value, ...) can still be accessible to the
operator through the 'fast access' menu.
To active the 'Password' function select 'on' and introduce
the 6 digits code. The code will be requested when trying to
access the 'configuration menu' (front key 'SQ' (<)).
At the 'FActory configuration' ('FAct') menu select 'yes' to
activate the default factory configuration. See section 1.15
for a list of default parameters.
The 'Version' ('VEr') menu informs about the firmware ver-
sion installed on the instrument.
At the 'Brightness' ('LIGh') menu select the intensity level
for the display . Use this function to adapt the brightness to
match other instruments in the vicinity or to the darkness or
clarity of your environment.
The output and control options are optional modules that
can be installed at the instrument. Formats B24 and B44
have 2 free slots for output and control options, while for-
mats B26 and B46 have 3 free slots (see section 1.4).
Several of these optional modules have their own configura-
tion menu embedded.
The 'OPt.1', 'OPt.2' and 'OPt.3' menu entries give access to
the configuration menu of the option installed.
See section 2 for a list of available output and control mod-
ules
23
Advertisement
Table of Contents
