Switch S1 (Laser Output Polarity/Configuration); Figure 2-19: Switch S1 (Laser Output Polarity/Configuration) - Aerotech Nmark SSaM Manual

Installation and Configuration

2.11. Switch S1 (Laser Output Polarity/Configuration)

Define the active laser output polarity using the Laser Output Polarity switches of S1 (see
CONFIG switch sets the Nmark to two or three axis mode (OFF= two axis, ON= three axis).
Figure 2-19:
44
Switch S1 (Laser Output Polarity/Configuration)
Chapter 2
Nmark SSaM Hardware Manual
www.aerotech.com
Section 2.4.). The