Warning And Safety Terms - Siemens SIWAREX R Construction Elastomer Bearing Instruction Manual

Warning and Safety Terms

DANGER
means, that death, severe injury to persons or damage to equipment can be
caused, if the respective safety measures have not been taken.
WARNING
means, that death or severe injury can be caused, if the respective safety
measures are not taken.
CAUTION
with a warning triangle means that failure to take the necessary precautions may
lead to minor injury.
CAUTION
without a warning triangle means that failure to take the necessary precautions
may lead to property damage.
IMPORTANT
means that failure to observe the appropriate instructions may lead to an
undesirable result or condition.
NOTE
means a notice concerning possible advantages of conforming with the
recommendation.
Copyright © Siemens AG 2012 All rights reserved
Circulation or duplication of this document, utilization and
disclosure of its contents are not permitted as long as not explicitly
approved. Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model or
design, are reserved.
Siemens AG
Automation and Drives
Process Instrumentation and Analytics
D-76181 Karlsruhe
Document-No.: A5E00295975A
Disclaimer
We have tested the contents of this document for compatibility
with the described hardware and software. This does not exclude
the possibility of discrepancies in which case, we do not guarantee
the complete compatibility of this document. The information in
this document is assessed regularly and any necessary corrections
are included in the following revision. We are grateful for any
suggestions of improvement.
© Siemens AG 2012
Subject to technical changes.
Page 4