Siemens SIWAREX R Construction Elastomer Bearing Instruction Manual page 20

Revision 11/12
6. Install the elastomer bearing unit:

Loosen the bolts on the dummies

Lift the loading platform from the first bracket and remove the dummy.

Install the elastomer bearing unit and screw the bolts in loosely.

Slowly lower the loading platform.

Install the remaining elastomer bearing units as described.

Ensure that the elastomer bearings are not under tension.

Tighten the fastening bolts.
Fig. 2-5 Assembly Elastomer Bearing BB 350 / 500 kg
Document-No.: A5E00295975A
Elastomer bearing
Page 20