Table of Contents
Advertisement
Revision 11/12
3.4
Care and Maintenance
Combi-mounting units are to be inspected depending on the environmental conditions. If
there is a high degree of dust, contamination, humidity etc., the maintenance intervals
are to be chosen respectively. These are to be kept free of course contamination. The flat
seal may not be subjected to direct streams of water. The round surfaces of the oscillation
bolts are to be greased when necessary. The overload protection mechanism should be
inspected for contamination.
3.5
Ordering Data
Combi-mounting units for
load cells with a nominal
10 - 200 kg
350 / 500 kg
In the order numbers above, the load cells are not included.
Document-No.: A5E00295975A
Order number
load of
7MH4 133-3DC11
7MH4 133-3KC11
Combi-Mounting Units
Page 38
Advertisement
Table of Contents
