Vari QuickFlex Walls Manual page 17

5
To install the door handle, use the 3-piece handle plates included. You can also use any
standard door handle and follow the manufacturer's installation instructions. To use the
included handle, pull the door lock mechanism to full length before inserting into the lock
cutout shown in Step 5A. Screw in the lock mechanism with the included screws. Do not
over tighten. Push the handle pieces onto each side of the door exterior. Use a screwdriver
to secure screws on each side. Tighten the lock plate screws.
6
Once the door is installed, install the door stretcher cover on the door stretcher. Align cover
with the stretcher and slide down to clip into place.
15.