Advertisement
Executive File Cabinet
Included Parts
x2
KEY
Tools Needed (Not Included)
½" WRENCH
PHILLIPS HEAD SCREWDRIVER
(800) 207-2587
Patent and trademark information: vari.com/patents
©2022 Varidesk, LLC All rights reserved.
Adjusting the Leveling Feet
FILE RAIL
x2
x2
DRAWER PULL
¾" PHILLIPS
DRIVE WOOD
x6
SCREWS
x1
To adjust the leveling foot under each corner of the file cabinet, use a ½" wrench to twist each foot as needed. Turning the
x1
wrench clockwise lowers the foot, while turning the wrench counter-clockwise raises it.
WARNING: Do not exceed product weight capacities.
• Top of Unit: 200 lb (91 kg)
• Top Drawer: 16 lb (7.5 kg)
• Bottom Drawer: 37 lb (17 kg)
Advertisement
Table of Contents
Related Manuals for Vari Executive File Cabinet 401653
Summary of Contents for Vari Executive File Cabinet 401653
- Page 1 WARNING: Do not exceed product weight capacities. • Top of Unit: 200 lb (91 kg) • Top Drawer: 16 lb (7.5 kg) • Bottom Drawer: 37 lb (17 kg) (800) 207-2587 Patent and trademark information: vari.com/patents ©2022 Varidesk, LLC All rights reserved.
- Page 2 Adjusting the Drawer Pull Placement Installing, Adjusting, and Removing File Hangers LEFT ALIGN Left hole on drawer pull aligns to left hole on drawer. CENTERED Center hole on drawer pull aligns to center hole on drawer. To install the file rails, simply place them on the side tracks of the bottom drawer. To reposition or remove the file rails, press along the bottom of the side track near the file rail to release the locking tooth, then slide the rail into the desired position or lift the rail off the tracks to remove.
Need help?
Do you have a question about the Executive File Cabinet 401653 and is the answer not in the manual?
Questions and answers