Vari QuickFlex Walls Manual page 6

5
Use a level to check alignment and connection of the stretchers,
are fully seated and secure before installing any panels.
level if necessary.
If you're creating a corner with your panels, you will need to change the position of the side
caps to ensure that you can seat and secure your stretchers. For an easier time moving the
frame before completion, ensure the whole wall frame for the entire configuration is built
and leveled before installing panels.
6
All panels should be installed with one person on each side of the wall.
upper and lower panels, align the channel on the lower panel with the lower stretcher and
then push the panel in until it clicks in place. We recommend putting all lower panels in first
before moving to upper panels.
4.
making sure all stretchers
Base plates can be adjusted to
For walls with