Advertisement
Quick Links
Performance Task Chair
SEAT BACK
x1
PISTON
x1
M8x30mm BOLTS
x5
Patent and trademark information: vari.com/patents |
(800) 207-2587
©2021 Varidesk, LLC All rights reserved.
SEAT
x1
CHAIR BASE
x1
ALLEN KEY
x1
1
Place the piston into the chair base with the smaller side pointed up.
2
Place the seat onto a table, and then line up the holes to connect the seat back to the seat. Then, insert the
bolts into the highlighted holes above, and use the Allen key to tighten them into place.
WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair
is damaged or incorrectly assembled.
2 People
Holds up to
Recommended
275 lb (125 kg)
Advertisement
Related Manuals for Vari 43285
Summary of Contents for Vari 43285
- Page 1 Allen key to tighten them into place. WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair Patent and trademark information: vari.com/patents | is damaged or incorrectly assembled.
- Page 2 Performance Task Chair Adjustments To adjust the seat height, lift the back lever under the right side of the chair seat. To lock the seat in an upright or reclined position, use the lever under the left side of the chair seat.
Need help?
Do you have a question about the 43285 and is the answer not in the manual?
Questions and answers