Executive Lateral File Cabinet
Included Parts
¾" PHILLIPS DRIVE
WOOD SCREWS
x6
DRAWER PULL
x2
KEY
x2
FILE RAILS
x1 Short
x4 Long
Tools Needed (Not Included)
½" WRENCH
x1
x1
PHILLIPS HEAD SCREWDRIVER
Patent and trademark information: vari.com/patents
©2022 Varidesk, LLC All rights reserved.
(800) 207-2587
Adjusting the Leveling Feet
To adjust the leveling foot under each corner of the lateral
file cabinet, use a ½" wrench to twist each foot as needed.
Turning the wrench clockwise lowers the foot, while
turning the wrench counter-clockwise raises it.
WARNING: Do not exceed product weight capacities.
• Top of Unit: 200 lb (91 kg)
• Top Drawer: 20 lb (9 kg)
• Bottom Drawer: 87 lb (39.5 kg)
Adjusting the Drawer Pull Placement
LEFT ALIGN
Left hole on drawer
pull aligns to left
hole on drawer.
CENTERED
Center hole on
drawer pull aligns
to center hole on
drawer.
RIGHT ALIGN
Right hole on drawer
pull aligns to right
hole on drawer.
To install the drawer handles, align either the left, center, or right hole on the drawer pull to
the predrilled left, center, or right hole on the file cabinet drawer. Secure the drawer pull with 3
wood screws and a Phillips head screwdriver. Repeat for the second drawer.