Related Manuals for Vari 401551
Summary of Contents for Vari 401551
- Page 1 Executive Task Chair Patent and trademark information: vari.com/patents 2 People Holds up to ©2022 Varidesk, LLC All rights reserved. Recommended 275 lb (124.7 kg)
-
Page 2: Parts And Tools
Parts and Tools HEADREST CHAIR SEAT CHAIR BACK PISTON BASE SCREW ALLEN KEY HEX SCREW SPRING WASHER FLAT WASHER... -
Page 3: Chair Assembly
Chair Assembly Align the back of the chair with the steel plate attached to the seat. Using the washers and hex screws provided, fasten the plate to the back of the chair with the Allen key. Remove the air piston and base from the packaging. Insert the piston into the base with the large end down, as shown. - Page 4 With assistance, flip the chair assembly onto the base assembly, lining up the hole with the top of the piston. Using even pressure, press firmly on the seat cushion a few times to ensure the seat is fully engaged with the piston. NOTE: Once assembled, do not attempt to disassemble the chair, as doing so may damage the product.
- Page 5 Align the holes on the headrest with the holes on the back of the chair. Use the provided Allen Key and Screws to secure the headrest. Once fastened, align and firmly push the cover piece into place.
-
Page 6: Chair Adjustments
Chair Adjustments To adjust the headrest’s height, gently pull up to raise and push down to lower. To adjust the seat height, engage the back lever under the right side of the seat, and adjust the seat height to the desired setting. - Page 7 To angle the armrests or slide armrests from front to back, push armrests accordingly. To adjust the position of the seat cushion, To adjust the arm height, press engage the front lever under the right side the button under the armrest of the seat, then slide the seat forward or and pull up or push down on the backward into the desired position.
- Page 8 WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair is damaged or incorrectly assembled. (800) 207-2587...