Vari QuickFlex Walls Manual page 5

3
LOWER STRETCHER
Before continuing and building wall sections, please read the following instructions
thoroughly. It's important to start building walls at the highest floor point, and you must
insert and secure all upper and lower stretchers before putting in any panels. Once the first
2 posts are assembled, place them where you want to assemble the first wall section. Begin
wall assembly with the lower stretcher.
For stability, have one person hold the post while the stretchers are being installed. To
install the lower stretcher, insert one side into one post and then the other side into the
next post. Push down until it clicks. Make sure it's level and seated correctly.
4
UPPER STRETCHER
Similar to the lower stretcher, insert the upper stretcher into the anchor points at the top of
each post. Once in place, pull down until it clicks.
3.