It may not be possible to remove the Mechatronic. In this case,
the gear selector is »caught« at the »upper left side« on the trans‐
mission housing.
In this situation, the Mechatronic must not be removed with strong
force.
– Place the Mechatronic back on the transmission housing and
secure the Mechatronic with a screw.
– Move the Mechatronic by hand into the »Removal position«.
Refer to
⇒ "3.4 DSG Transmission Mechatronic J743 , Moving into
Removal Position by Hand", page 115
Install the Mechatronic. Refer to
⇒ "3.5 DSG Transmission Mechatronic J743 , Installing",
page 119
.
3.4
DSG Transmission Mechatronic -
J743- , Moving into »Removal Position«
by Hand
Special tools and workshop equipment required
♦ Pry Lever - 80-200-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
7-Speed Dual Clutch Transmission 0AM - Edition 09.2015
.
3. DSG Transmission Mechatronic J743
115