– Measure dimension "B 2 " on the opposite side of the locking
ring.
Note
Do not measure on the end of the locking ring. The circlip could
get pushed away and this would falsify the measurement.
•
Example: dimension "B 2 " = 3.00 mm
– Calculate the mean value from "B 1 " and "B 2 ".
Formula: B 1 + B 2 2
Example:
•
2.92 + 3.002 = 2.96 mm
•
Result: dimension "B" = 2.96 mm
– Remove the circlip again and dispose it.
Step 3: Determine the Dimension "A 1" for the "K 1" Clutch En‐
gaging Bearing.
– Place the Setting Tool - Release Bearing - T10374- with the
large opening downward on the larger engaging bearing.
– Press and turn the Setting Tool - Release Bearing - T10374-
to make sure the Setting Tool - Release Bearing sits correctly
on the engaging bearing.
•
The engaging bearing turns with the Setting Tool - Release
Bearing - T10374- .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
7-Speed Dual Clutch Transmission 0AM - Edition 09.2015
1. Dual Clutch, Removing and Installing, through Transmission Production Date 05/2011
25