Setting Mechatronic Unit To Removal Position By Hand - Volkswagen Jetta Hybrid 2013 Workshop Manual

Jetta Hybrid 2013 ➤
7-speed dual clutch gearbox 0CG - Edition 08.2012
• After the high-voltage system has been re-energised, bleed
hydraulic clutch mechanism of disengagement clutch using
⇒ Vehicle diagnostic tester in
Note
The disengagement clutch in the electric drive motor -V141- sep‐
arates the combustion engine from the electric drive motor -
V141- .
–
Initiate basic adjustment
Specified torques
♦ ⇒ Fig. "" Mechatronic unit for dual clutch gearbox -J743- -
specified torque and tightening sequence"" , page 94
7.3

Setting mechatronic unit to removal position by hand

• Only if you cannot set the mechatronic unit to removal position
with the vehicle diagnostic tester , you must set the unit by
hand to this position.
108
Rep. gr.34 - Controls, housing
mode.
Guided functions
⇒ page 13 .