Engine Oil: Capacities And Specifications - Volkswagen Touareg 2010 Maintenance Manual

Touareg 2010 ➤ , Touareg 2015 ➤
Maintenance - Edition 02.2019
– Release sealing cap -arrow- using a 32 mm socket.
– Remove sealing cap together with oil filter element.
– Separate oil filter element -3- from sealing cap -1-.
– Clean sealing surfaces on threaded cap and oil filter housing.
Installing
– Renew oil filter element -3-.
– Install sealing cap -1- with new O-rings -2- and -4- and tighten
to 25 Nm.
The remaining assembly steps are basically a reverse of the dis‐
mantling procedure.
4.31.9 Engine oil: replenishing

Engine oil: capacities and specifications

General information
Note
Please observe disposal instructions!
♦
The vehicle has no oil dipstick in the engine compartment. The
♦
current engine oil level can be called up in the infotainment
system screen or can be checked using the oil gauge tester -
T40178- .
– After replenishing with oil, wait at least 3 minutes and then
check oil level. ⇒ page 85
4.32 Engine oil: capacities and specifications
Petrol engines
Engine code
CGEA
CGFA
CGNA
CGRA
94
4. Descriptions of work:
⇒ page 94
Oil quantity with filter
Capacity / output
3.0 l / 245 kW
3.0 l / 245 kW
4.2 l / 265 kW
3.6 l / 206 kW
Touareg 7P
(I)
With flexible service
6,8
6,8
8,4
6,7
VW engine oil standards
With fixed service
504 00 502 00
504 00 502 00
504 00 502 00
504 00 502 00