Volkswagen Touareg 2010 Maintenance Manual page 109

The puller hook to remove the cover caps is located with the ve‐
hicle tool kit.
– Place the puller hook through opening in cover cap.
– Pull off cap using the puller hook.
Loosening/tightening anti-theft wheel bolts
Note
To loosen/tighten the anti-theft wheel bolts a special adapter,
♦
located in vehicle tool kit, is required.
♦ To loosen the anti-theft wheel bolts (lockable wheel bolts) do
not use an impact screwdriver.
If the adapter to loosen or tighten the anti-theft wheel bolts is
♦
not available in the vehicle, use the corresponding adapter set
for tamper-proof wheel bolts.
Special tools and workshop equipment required
♦ Adapter set for tamper-proof wheel bolts - T10101-
♦ Adapter set for tamper-proof wheel bolts - T10313-
Touareg 2010 ➤ , Touareg 2015 ➤
Maintenance - Edition 02.2019
4. Descriptions of work:
105