Service Interval Display: Resetting; Service Interval Display: Recoding - Volkswagen Touareg 2010 Maintenance Manual

– Depending on type, turn wiper blade with lip upwards and pull
it off. Or detach the wiper blade at the hinged point -3- by
pressing the locking element -1- in the holder -2- and pulling
out the wiper blade.
– Push the standard wiper blade into mounting. Ensure that it
audibly engages into locking device or turn wiper blade with
lip down onto stop.
Caution
When doing this, do not touch the wiper blade to prevent dam‐
age.
– Carefully place wiper arm back onto windscreen.
– Switch ignition on and briefly operate the wiper lever to move
the wipers back to park position. Switch ignition off again.
4.49

Service interval display: resetting

Additional information for service interval display
The service interval display (SID) must be reset during
♦ every delivery inspection (see note)
♦ every oil change service, interval service and inspection serv‐
ice
♦ each oil change (flexible/fixed)
.
Note
The "inspection-service reset" test program makes a distinction
between whether resetting is carried out during the delivery in‐
spection or during the inspection service. The time counter is
reset in such a way that either 3 or 2 years, respectively 1095 or
730 days, is set as the maximum value for the next inspection
service. The factory setting fro the first inspection interval is 1095
days. The maximum value for the kilometre counter is always
60,000 km.
4.49.1 Service interval display: resetting using
vehicle diagnostic tester
– Reset service interval display ⇒ Vehicle diagnostic tester.
– Select the respective service which is to be reset.
4.50

Service interval display: recoding

Recoding from flexible to fixed intervals
– Connect vehicle diagnostic tester
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select "Without task".
– Select "Control unit list".
– Select "Dash panel insert".
– Select "Guided Functions".
⇒ page 5
ODIS Service
⇒ page 22 .
Touareg 2010 ➤ , Touareg 2015 ➤
Maintenance - Edition 02.2019
4. Descriptions of work:
143