Volkswagen Touareg 2010 Maintenance Manual page 93

– Use flexible funnel - VAS 6675- to drain engine oil.
– Place funnel on subframe and assembly carrier.
– Remove oil drain plug.
– Clean M24 oil drain plug and fit new seal. The M14 oil drain
plug with integrated seal must always be renewed. ⇒ Elec‐
tronic Parts Catalogue ETKA
– Let engine oil drain.
Note
Please observe disposal instructions!
– Screw in oil drain plug together with seal hand-tight and then
tighten to specified torque.
– Replenish engine oil.
Engine oil capacity:
♦ ⇒ Maintenance tables
♦ Engine oil: capacities and specifications
Specified torques:
♦ Oil drain plug M14: 30 Nm
♦ Oil drain plug M24: 50 Nm
WARNING
♦ Torque specifications must not be exceeded.
♦ Excessive torque can cause leaks in the area of the oil
drain plug or even damage.
4.31.3 Oil filter: renewing
Oil filter in 6-cylinder TSI (hybrid) petrol engine: renewing.
⇒ page 90
Oil filter in 6-cylinder FSI petrol engine: renewing
Oil filter in 6-cylinder diesel engine: renewing.
Oil filter in 8-cylinder diesel engine: renewing.
Oil filter in 8-cylinder petrol engine: renewing.
4.31.4 Oil filter in 8-cylinder diesel engine: re‐
newing
Remove engine cover panel .
Special tools and workshop equipment required
♦ Socket insert - SW 32- .
⇒ page 94
⇒ page 91
⇒ page 92
⇒ page 89
⇒ page 93
⇒ page 96
Touareg 2010 ➤ , Touareg 2015 ➤
Maintenance - Edition 02.2019
4. Descriptions of work:
89