Installation And Assembly - Bosch Rexroth PS5000 Commissioning And Operating Instructions

1−6 Bosch Rexroth AG
Safety Instructions
1.5

Installation and Assembly

Electric Drives
and Controls
DANGEROUS ELECTRICAL VOLTAGE
Danger of life during installation work while systems are switched
on!
Make sure that all plant sections undergoing operations during
the installation are de-energized and sufficiently protected
against accidental reclosing!
DANGER
Non-workmanlike installation or mounting may lead to personal
injury or damage to property.
Therefore, it is essential that you take the technical data (environ-
mental conditions) into account for installation or mounting.
Installation or mounting must be carried out by skilled personnel
only.
DANGER
Insufficient degree of protection may be life-threatening or cause
damage to property!
Beachten Sie deshalb für Einbau und Montage die Angaben in den
relevanten Kapiteln.
DANGER
Danger of injury and of damage to property through incorrect in-
stallation!
Devices and, in particular, operating means, must be installed so
as to be properly safeguarded against unintentional operation or
contact.
CAUTION
Short circuits!
When cut-outs are drilled or sawed in switchgear cubicles, metal
burr may get into modules already installed there. Or, when coo-
ling water lines are connected, water may leak into the modules in-
stalled.
The possibility of short circuits occurring in the process or even
the destruction of the devices cannot be entirely ruled out.
Therefore, guard any existing modules well before you install a
new module! Any and all warranty excluded in case of non-com-
pliance.
BT 6.190 1070087068 / 01