17
Windows Portrait
Remove original plastic cable cover.
Add (2) screws from bag "L" at positions shown on VESA
mount ("A" label below). Leave ~3mm (1/8") gap for mounting
to Display Bracket.
B
Add (2) screws from bag "T" at positions labeled "B".
Leave ~3mm (1/8") gap for later mounting of Cable
Bracket.
Top Portrait
Cable
A
direction
18
Before attaching i-Series, route
bottom of stand head and through Display Bracket. Route
USB Hub
cable or other
USB
power, LAN cables
through
if used.
© Copyright 2019 Elo Touch Solutions, Inc.
13