Page 3
Add (2) screws from bag “A”; leave ~3mm (1/8”) gap for Head. Remove and save (2) screws on rear of Head, pull out printer tray. Align slots on bottom rear of Head with (2) screws on base and slide on stand. Add (4) screws from bag “B”. Tighten (2) previous screws at rear.
Page 5
Assemble USB Hub. Add (2) screws from bag “S”; leave ~3mm (1/8”) gap for USB bracket to slide on; tighten screws. Assemble Display Bracket onto Head. Position “A” for 15”, 22” in landscape. If using an EMV Cradle, follow those Position “B”...
Page 6
Android Landscape (For Portrait, go to step Top Landscape Cable direction Add tie-wrap Mount I-Series, add (2) screws from bag “L” Add (2) screws from bag “L” to top VESA positions. Leave ~3mm (1/8”) gap for mounting to bottom VESA positions. Route power, LAN cables through bottom...
Page 7
Android Portrait Top Portrait Cable direction Add tie-wrap Add (2) screws from bag “L” to top VESA Mount I-Series, add (2) screws from bag “L” positions. Leave ~3mm (1/8”) gap for mounting to bottom VESA positions. to display bracket. Route power, LAN cables through bottom Remove cable cover(s) before mounting displays...
Page 8
Windows Landscape (For Portrait, go to step 15) Remove original plastic cable cover. Add (2) screws from bag “L” to top VESA positions (“A” label Add tie-wrap below). Leave ~3mm (1/8”) gap for mounting to Display Bracket. Top Landscape Cable direction Mount I-Series, add (2) screws from bag “L”...
Page 10
Windows Portrait Remove original plastic cable cover. Add (2) screws from bag “L” at positions shown on VESA mount (“A” label below). Leave ~3mm (1/8”) gap for mounting to Display Bracket. Top Portrait Cable direction Add (2) screws from bag “T” at positions labeled “B”. Before attaching I-Series, route power, LAN cables through...
Page 12
Add (2) screws from bag “C” If no printer, skip to step to printer tray; use Star printer bracket to set depth of screws than remove Star bracket. If using printer, remove cover to add printer. Star Go to step printers.
Page 16
For more information, go to www.elotouch.com/support, or call the office nearest you. Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any products. Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
Page 24
Assemble USB Hub. Add (2) screws from bag “S”; leave ~3mm (1/8”) gap for USB bracket to slide on; tighten screws. Assemble Display Bracket onto Head. Position “A” for 15”, 22” in landscape. If using an EMV Cradle, follow those Position “B”...
Page 25
Android Landscape (For Portrait, go to step 12) Top Landscape Cable direction Add tie-wrap Mount i-Series, add (2) screws from bag “L” Add (2) screws from bag “L” to top VESA positions. Leave ~3mm (1/8”) gap for mounting to bottom VESA positions. Route power, LAN cables through bottom...
Page 26
Android Portrait Top Portrait Cable direction Add tie-wrap Add (2) screws from bag “L” to top VESA Mount i-Series, add (2) screws from bag “L” positions. Leave ~3mm (1/8”) gap for mounting to bottom VESA positions. to display bracket. Route power, LAN cables through bottom Remove cable cover(s) before mounting displays...
Page 27
Windows Landscape (For Portrait, go to step 17) Remove original plastic cable cover. Add (2) screws from bag “L” to top VESA positions (“A” label Add tie-wrap below). Leave ~3mm (1/8”) gap for mounting to Display Bracket. Top Landscape Cable direction Mount i-Series, add (2) screws from bag “L”...
Page 29
Windows Portrait Remove original plastic cable cover. Add (2) screws from bag “L” at positions shown on VESA mount (“A” label below). Leave ~3mm (1/8”) gap for mounting to Display Bracket. Top Portrait Cable direction Add (2) screws from bag “T” at positions labeled “B”. Before attaching i-Series, route power, LAN cables through...
Page 31
Add (2) screws from bag “C” If no printer, skip to step to printer tray; use Star printer bracket to set depth of screws than remove Star bracket. If using printer, remove cover to add printer. Star Go to step printers.
Page 36
For more information, go to www.elotouch.com/support, or call the office nearest you. Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any products. Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
Page 39
Add (2) screws to EMV Mount Plate from bag “P” Assemble EMV Arm to Display Bracket. Add (2) screws from bag “P” at right most position at position 1, 2,3 or 4. Leave ~3mm (1/8”) gap (for “A” to secure EMV Arm to Display Bracket. EMV Arm).
Page 40
Cover Plate Attach EMV Cover Plate and screws. Remove and save EMV Cover Plate and screws. Add (3) screws for mounting EMV terminal: Route EMV terminal - Use bag “G” for Ingenico iSC250 cable and tie-wrap. - Use bag ”H” for Verifone MX915 Attach EMV terminal cable to terminal and slide terminal onto (3) Arm Assembly screws.
Page 41
Remove plastic cover from right edge of display. Add Edge Bracket using (2) screws from bag “C”. Use Edge Bracket “15 A” for Android 15” Use Edge Bracket “22 A” for Android 22” Use Edge Bracket “15 W” for Windows 15” Use Edge Bracket “22 W”...
Page 42
For more information, go to www.elotouch.com/support, or call the office nearest you. Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any products. Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
Page 45
Add (2) screws to EMV Mount Plate from bag “P” Assemble EMV Arm to Display Bracket. Add (2) screws from bag “P” at right most position at position 1, 2,3 or 4. Leave ~3mm (1/8”) gap (for “A” to secure EMV Arm to Display Bracket. EMV Arm).
Page 48
For more information, go to www.elotouch.com/support, or call the office nearest you. Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any products. Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
Page 51
Assemble EMV Arm to Display Bracket. Add Add (2) screws to EMV Mount Plate from bag “P” (2) screws from bag “P” at right most position at position 1, 2,3 or 4. Leave ~3mm (1/8”) gap (for “A” to secure EMV Arm to Display Bracket. EMV Arm).
Page 55
For more information, go to www.elotouch.com/support, or call the office nearest you. Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any products. Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.