Power Direction For Other Switches - ABB ITS2.1 User Manual

ITS2.1 User Manual rev.04/1SEP622750P0001 32
10.3

Power direction for other switches

The ITS and adapter module is also a standalone product that can be used for OT&OS or other low voltage
switchgear. In this application, ITS and adapter module needs to be fixed separately and connected to switch
by external cable, refer to the ITS standalone product installation instruction.
The power direction setting is done by users themselves, just connect the three phase voltage cables (from
outgoing side) to the voltage sensing connector X3 on the standalone ITS.
Note: In Ekip Connect, keep the feeding side is 'BUSBAR SIDE'.