ABB ITS2.1 User Manual page 22

ITS2.1 User Manual rev.04/1SEP622750P0001
Connections
Connected client
Static IP Address
Force Static IP address
Static IP Address
Static Network Mask
Static Gateway address
Ther are three IP Addresses of of the client devices connected to the modules.
Off: Dynamic IP address
On: Static IP address
Displayed with the static IP Address enabled, it must be selected in order to insert the
IP address of the modules
Displayed with static IP Address enabled, it must be selected in order to insert the
subnet mask of the modules
Displayed with static IP Adress enabled, it must be selected in the persence of multiple
subnets, in order to insert the IP Address of the mode to which the modules are
connected
22