ABB ITS2.1 User Manual page 36

2. Plug the Ekip Display into the front of the ITS2.1.
(1) Plug first in the guide pin at the left side and then the USB connector ( 2) at the right side
3. Fix the Ekip Display by rotating the closing button to closed position by using a screw driver
The ITS2.D can be connected to a laptop for configuration by using the T&P cable unit to the USB connector at
the lower side of the Ekip Display unit.
ITS2.1 User Manual rev.04/1SEP622750P0001
1
2
36