Ekip Display Signaling Area - ABB ITS2.1 User Manual

14.4

Ekip Display signaling area

Signalling area is always present on the Display and it will show the actual status of the ITS device (exception is
when Ekip T&P and/or Ekip TT is connected to the display through the lower mini USB connector).
The actual status is represented by icons (see Table 1), due to the limited space available only one icon at the
time is shown, cycling through all the active icons in loop.
Table 1: Signalling area icons
Icon Description
Local/Remote setting of XR ITS2.D when MOT (Motor)
ON if power supply is present
ON if communication between ITS/Ekip Display is lost
ON if Plant nominal voltage is INVALID
ON if Fuse blown
ON if Fuse is blown and the MOT has disconnected the apparatus.
ON if no communication with the SCADA system
ON if undefined communication with the SCADA system
ON if last command (Motor operated) failed
The ITS2.D connected with the T&P cable unit to the USB connector at the lower side of the Ekip Display unit.
ITS2.1 User Manual rev.04/1SEP622750P0001 39