ABB ITS2.1 User Manual page 14

ITS2.1 User Manual rev.04/1SEP622750P0001
SWITCH INFORMATION
Switch type
Switch position
Number of operations
(closed to open)
Motor open/close
command failed.
ITS STATUS
Supply from Vaux Should indicate YES when the
ITS2 unit is fitted into a main
switch and 24 VDC is present
Supply from test YES when the ITS2 unit is
connected to a laptop by T&P
Local/Remote Remote: commands on Modbus
operating mode is accepted
Local: commands on Modbus
are rejected.
LED alive If ENABLED, the power LED will
flash.
Used to identify the ITS2 unit
Wink
when several units are
connected to a Modbus line. The
Power LED will flash with 2 Hz
Indicates main switch type,
Slimline XRG00, Slimline XRG1,
Slimline XRG2, Slimline XRG3,
InlineII, OT, OS, Other
Indicates switch status, open
or closed
Counts the number of times
the switch has gone from a
closed to open status
Set if a command sent to the
switch fails
COMMANDS
Open switch
Close switch
Wink
14
If equipped with motor,
switch will open when
selected
If equipped with motor,
switch will close when
selected
Power LED flashes with 2 Hz
when selected