Sony DNW-A75 Maintenance Manual page 179

M390 : INPUT PIN ASSIGN
This menu changes and resets the input pin setup data.
Also displays the logic level of the input pin.
Description of display
The pin numbers are displayed at the line of "No.". Also
the right at the pin number is displayed the logic level state
(H;high, L;low).
To change the setup data
(1) Turn the search dial (JOG mode) to set the * mark to
the left side of the data to be changed.
(2) Turn the search dial while pressing the JOG button to
change the data.
FORWARD direction (2): Data value increase
REVERSE direction (3): Data value decrease
n
At the first bite, the data change only area of which
from 00 to 73. If it is required to extend the area of
which from 00 to FF, turn the search dial while
pressing the EJECT and PLAY buttons simultaneous-
ly.
(3) Repeat steps (1) and (2) for any other data.
(4) To finish the menu, press the MENU button once.
(5) To save the setup data into the NV-RAM, execute the
SAVE ALL DATA in M392 : NV-RAM CONTROL
menu.
DNW-A75/A75P
Example of display and operation
50PIN DATA ASSIGN
M390:INPUT PIN ASSIGN
No. Command
---+--------------------
*
01:H 20 10 00 00 00 00
18:H 20 30 00 00 00 00
19:H 20 05 00 00 00 00
20:H 20 20 00 00 00 00
21:H 40 10 00 00 00 00
22:H 20 04 00 00 00 00
23:H 20 0F 00 00 00 00
(1) 0 DIAL
50PIN DATA ASSIGN
M390:INPUT PIN ASSIGN
No. Command
---+--------------------
01:H 20 10 00 00 00 00
*
18:H 20 30 00 00 00 00
19:H 20 05 00 00 00 00
20:H 20 20 00 00 00 00
21:H 40 10 00 00 00 00
22:H 20 04 00 00 00 00
23:H 20 0F 00 00 00 00
(2) 0 [JOG] + DIAL
50PIN DATA ASSIGN
M390:INPUT PIN ASSIGN
No. Command
---+--------------------
01:H 20 10 00 00 00 00
*
18:H 20 50 00 00 00 00
19:H 20 05 00 00 00 00
20:H 20 20 00 00 00 00
21:H 40 10 00 00 00 00
22:H 20 04 00 00 00 00
23:H 20 0F 00 00 00 00
[MENU]
(4)
0
(5)
0
Data save
* M392:NV-RAM CONTROL
4-4. OTHERS CHECK Mode (M3)
4-4-8. 50PIN DATA ASSIGN Mode (M39)
4-89