Sony DNW-A75 Maintenance Manual page 173

Calendar/clock setting
The calendar/clock's date and time of this unit can be
adjusted in the setting mode as described below.
In a display/operation example on the right, 9:23 of July
3rd in 1998 is set to 15:00 of August 1st in 1998.
(1) Turn the search dial slowly and turn on and off the
numerical value (year, month, day, hour, minute, or
second) of the calendar/clock item to be changed.
m
. When the * mark is displayed in the setting menu,
turn the search dial continuously in FORWARD
(2) direction until the numerical value blinks. For
the calendar/clock setting, the * mark is not dis-
played on the superimposed display.
. Do not turn the search dial excessively in RE-
VERSE (3) direction during setting. The * mark is
displayed in the setting menu and the calendar/clock
setting is stopped.
(2) Turn the search dial while pressing the JOG button and
change the numerical value to the desired one.
m
. The count display of seconds stops when the
numerical value is changed. The internal data is
updated.
. On the superimposed display, a message "Push SET
Button" is displayed in the upper line.
(3) Repeat steps (1) and (2) until the numerical values in
other items are changed completely.
(4) Press the SET button to save the setting values.
m
. To change only the date, the time must also be set
again.
. To cancel the calendar/clock setting, terminate the
setting mode or turn the search dial in REVERSE
(3) direction until the * mark is displayed in the
setting menu (the setting menu item is displayed for
the time data display area).
. The unit enters the normal operation state when the
SET button is pushed with the message "Push SET
Button" not displayed on the superimposed display.
Press the MENU button to return to the former
state.
. To set the time accurately, press the SET button
immediately the display and current time coincided.
(5) To exit the setting mode, press the MENU button
once.
DNW-A75/A75P
Example of display and operation
ERROR LOGGER
(001/003)
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
------------------------
TAPE ERROR ON
*
WARNING ON
CONDITION ON
'98 07 03 09:23:24
0 DIAL (2)
'98 07 03 09:23:25
0 DIAL (2)
'98 07 03 09:23:25
0 [JOG] + DIAL (2)
Push SET button
'98 08 03 09:23:25
0 DIAL (2)
Push SET button
'98 08 03 09:23:25
0 [JOG] + DIAL (3)
Push SET button
'98 08 01 09:23:25
0 DIAL (2)
Push SET button
'98 08 01 09:23:25
0 [JOG] + DIAL (2)
Push SET button
'98 08 01 15:23:25
0 DIAL (2)
Push SET button
'98 08 01 15:23:25
0 [JOG] + DIAL (3)
Push SET button
'98 08 01 15:00:25
0 DIAL (2)
Push SET button
'98 08 01 15:00:25
0 [JOG] + DIAL (3)
Push SET button
'98 08 01 15:00:00
0 [SET]
'98 08 01 15:00:00
0
'98 08 01 15:00:01
4-3. Error Logger Display Mode (M2)
4-3-3. Setting Mode
4-83