Installation; Installation Procedure; Supplied Accessories - Sony DNW-A75 Maintenance Manual

1-1. Installation Procedure

Installation procedure of this unit is shown on the follow-
ing flowchart.
Refer to each section about detail of each flow.
The operation manual is also required to do *-marked
flow.
Start
Determination of
installation place
Unpacking
n
When the unit is transported, it is required to pack the unit into the specified new packing materials.
Do not reuse the packing materials.
Rack mounting
*Connection
*Initial setup
*Operation check
n
If an error message appears on the time data display area, refer to "3. Error Message".
End
DNW-A75/A75P
Section 1

Installation

1-3. Operating Conditions
1-4. Power Supply
1-5. Installation Space
1-6. Rack Mounting
1-7. Matching Connectors and Cables
1-8. Signal Inputs and Outputs
1-9. Switch Settings on Connector Panel
1-10. Switch and Shorting Plug Settings on PC Boards
1-11. Switching Search Dial Mode
1-12. Reference System
1-13. Settings and Adjustment when External Equipment is Connected

1-2. Supplied Accessories

Screws for rack mounting (PSW 4 x 16) .......................... 4
Operation manual .............................................................. 1
Maintenance manual (Part 1) ............................................. 1
1-1