When A Message Is Displayed While Using The Fax Function - Ricoh IM 2702 User Manual

When a Message Is Displayed While Using the
Fax Function
• When confirming or changing the settings in [Settings], press [Home] (
Messages Displayed During Operation or When Sending/Receiving a Fax
Cannot Be Performed
Message
"Cannot detect original
size."
"Error occurred, and
transmission was
cancelled."
"Memory is full. Cannot
scan more. Transmitting
only scanned pages."
Condition
An original is not placed
correctly on the
machine.
An original with a
difficult-to-detect size,
even in the regular size,
such as a transparency
or paper with sticky
notes or a custom size
original, is placed on
the machine.
An original had jammed
while sending a fax.
An error occurred
temporarily in the
machine, or there was
interference on the line
such as excessive noise
or cross-talk.
The memory is full.

When a Message Is Displayed While Using the Fax Function

) after closing [Settings].
Solution and reference
Place the original correctly. When you place
an original on the exposure glass, the machine
detects the original size by opening and
closing the ADF. Open the ADF by more than
30 degrees when placing an original.
Specify [Scan Size] in [Settings].
Press [Confirm], remove the jammed original,
and then send the fax again.
Press [Confirm] and send the fax again.
Press [Confirm] to return to the stand-by state
and start sending the pages that are already
scanned and stored. Check the transmission
result report for unsent pages, and send those
pages later.
185