Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pentair HYDROMATIC HYDR-O-RAIL SYSTEM
Summary of Contents for Pentair HYDROMATIC HYDR-O-RAIL SYSTEM
- Page 1 NOTE! To the installer: Please make sure you provide this manual to the owner of the equipment or to the responsible party who maintains the system. Item # E-03-358 | Part # 5625-358-1 | © 2012 Pentair Pump Group, Inc. | 10/30/12...
-
Page 2: General Information
CALIFORNIA PROPOSITION 65 WARNING: General This product and related accessories contain chemicals Information known to the State of California to cause cancer, birth defects or other reproductive harm. Thank you for purchasing your Systems Description: Hydromatic pump. To help ensure ®... -
Page 3: Installation Instructions
The hazardous location Hydr- Engineered Catalog. Follow 90˚ elbow and a horizontal O-Rail systems (optional) are Installation Drawing run of piping sized to mate designed for use with hazardous Data, taking into account with valve box piping or location pump models the location of the discharge force main piping. - Page 4 bolts into the top of the precast guide rail braces required are using a gasket between the cover or drill holes for expansion as follows: two. lag screws. Use either ⁄ " nuts Sump Depths or stainless steel bolts to secure 9.
- Page 5 diaphragm will, in most the coupling provided with fail and the other to operate cases, compensate on the override level with the bushing. Grout in coupling misalignment and incorrect sump level never reaching going through sump wall clearance. It should, however, the alarm level.
-
Page 6: Pump Maintenance
procedure. Repot the leads in the the pump. Pull the pump from sparkable electrical devices or potting head according to N.E.C the basin to find the clog. flames in a septic (gaseous) or and/or local codes. possible septic basin. 5. Plugging beyond the sealing For the removal of the pumps and flange. - Page 7 Basin level is pumped down with selector switch on Hand position, but is not pumped down with selector switch on Automatic position. 1. Floats are not hanging free in the basin or are covered with debris. Pump the level down with the selector switch on Hand, so that the floats can be observed.
-
Page 8: Instructions For Assembly
HYDR-O-RAIL SYSTEM Instructions for Assembly UPPER RAIL LIFTING CHAIN GUIDE SUPPORTS (OPTIONAL) ACCESS FRAME PUMP CARRIER INTERMEDIATE GUIDE RAIL ASSEMBLY SUPPORTS GUIDE RAILS STEEL RAIL SLIDES FOR STANDARD LUGS PUMP BRONZE RAIL SLIDE INSERTS FOR HAZARDOUS LOCATION PUMPS HYDRAULIC SEALING FLANGE ASSEMBLY WITH BUNA DIAPHRAGM DISCHARGE... - Page 9 NOTE: For a triplex installation maintain the same HYDR-O-RAIL clearance distance between the base plates as the Mounting Stud Locations duplex installations. SUMP RAILS RAILS SUMP SUMP SUMP Simplex Duplex Pump Pump Discharge Sump Discharge Size Size Dia. Simplex Duplex 4'–...
- Page 10 THIS PAGE INTENTIONALLY LEFT BLANK...
- Page 11 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 12: Standard Limited Warranty
Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.
Need help?
Do you have a question about the HYDROMATIC HYDR-O-RAIL SYSTEM and is the answer not in the manual?
Questions and answers