Table of Contents
Advertisement
Read and Heed
SKYJACK is continuously improving and expanding product features on its equipment, therefore, specifications
and dimensions are subject to change without notice.
Telehandler Definition
A material handler designed primarily as a fork truck with a pivoting telescopic boom which enables it to pick and
place loads at distances as well as various lift heights.
Purpose of Equipment
SKYJACK Zoom Boom telehandlers are designed to lift, handle and transport agricultural or industrial products by
means of specific attachments.
Use of Equipment
The telehandler is a highly maneuverable, mobile work station. Lifting, handling and driving must be on a flat, level,
compacted surface. It can be driven over uneven terrain only when the boom is fully lowered.
Manual
The operating manual is considered a fundamental part of the telehandler. It is a very important way to communicate
necessary safety information to users and operators. A complete and legible copy of this manual must be kept in
the provided weather-resistant storage compartment on the telehandler at all times.
Operator
The operator must read and completely understand both this operating manual and the safety panel label located on
the telehandler and all other warnings in this manual and on the telehandler. Compare the labels on the telehandler
with the labels found within this manual. If any labels are damaged or missing, replace them immediately.
Service Policy and Warranty
SKYJACK warrants each new ZB series telehandler to be free of defective parts and workmanship for the first 12
months or 2000 hours, whichever occurs first. Any defective part will be replaced or repaired by your local SKYJACK
dealer at no charge for parts or labor. Contact SKYJACK Service Department for warranty statement extensions or
exclusions.
Optional Accessories
The SKYJACK Zoom Boom telehandler is designed to accept a variety of optional accessories. Operating instructions
for these options (if equipped) are located in
For non-standard components or systems, contact the SKYJACK Service Department at
(
: 800 275-9522
: 630 262-0006
7
Include the model and serial number for each applicable telehandler.
Scope of this Manual
a.
This manual applies to the ANSI/ASME/ITSDF and CSA versions of the ZB12032 telehandler.
- Equipment identified with "ANSI" meets the ANSI/ITSDF B56.6-2005 and ASME B56.6 standards.
- Equipment identified with "CSA" meets the CSA B335-04 standard.
b.
CSA (Canada)
Operators are required to conform to national, territorial/provincial and local health and safety regulations
applicable to the operation of this telehandler.
c.
ANSI (United States)
Operators are required by the current ANSI standards are required to conform to national, territorial/provincial
and local health and safety regulations applicable to the operation of this telehandler.
ZB12032
Section 2
of this manual.
Section 1 - About Your Telehandler
December 2007
1
TM
Page 7
Advertisement
Table of Contents
