2.3 Major Assemblies
The telehandler consists of four major assemblies: the
frame, boom assembly, attachment and cab.
2.3-1 Frame
The frame is a one-piece weldment that supports the
boom assembly.
2.3-2 Cab
The cab is the safety structure enclosing the operator.
It also furnishes the controls of the telehandler.
2.3-3 Boom Assembly
The boom is mounted on the frame and consists of two
telescoping boom sections.
2.3-4 Attachment
The attachment is a material-handling device attached
to the boom. The standard attachment is a fork carriage.
Refer to
Section 2.12
for various attachments.
ZB12032
2.4 Serial Number Nameplate
The serial number nameplate, located inside the
operator's cab, lists the following:
•
Model number
•
Serial number
•
Maximum capacity
•
Maximum lift height
•
Machine weight
•
Year of manufacture
•
Voltage
•
Lift capacity
•
Original supplied attachments
December 2007
Section 2 - Operation
TM
Page 19