Frima VarioCooking Center 112 Manual page 8

General Instructions / For Your Safety
Low water
If the display lights up, check that the water valve
is open and the strainer at the water inlet (solenoid
valve) is unblocked.
Power failure
After a power failure, your VarioCooking Center
completes the last active cooking process. A "Power
failure" text is displayed.
Ambient temperatures
Do not operate at ambient temperatures below
+5°C.
Core temperature probe
• The core temperature probe may be hot – use
oven gloves.
• Allow the core temperature probe to cool down
before using it.
• Do not let core temperature probe hang out of
the pan.
• Remove the core temperature probe from the
food before removing a load.
• When not in use, place the core temperature
probe in the position provided in the cover.
Hand shower
Pull hand shower out to use.
The hand shower retracts automatically.
Make sure that the hand shower hose is fully
rewound after use.
Attention!
• Close the socket cover before using the
®
hand shower.
Vitro Ceran plate
Do not use pots or pans with handles on the Ceran
plate (risk of tipping when the pan is moved or the
cover is closed).
Attention!
• Do not place cooking utensils or aluminium
sheets, etc, on the Ceran plate while it is
still hot.
• Do not use the Ceran plate as a holding
surface. Risk of burns!
• If the Ceran plate is split or broken,
disconnect the unit or elements from the
power supply immediately.
Pan valve
If the pan is too hot, the pan valve is locked and
cannot be opened until it has cooled down.
- 8 -