Install Drivers; Windows Os - ATTO Technology Celerity FC-41EL Installation And Operation Manual

Before installing your Celerity adapter, you must configure your system to recognize and use it by installing drivers
for your operating system.
Configure your system to recognize and use your
Celerity adapter by installing drivers for your operating
system.
Note
If you already have one or more Celerity
adapters installed and you are installing
additional adapter(s), you do not need to
perform any of these procedures unless you
are updating a previously installed driver.
Windows
The Celerity FC adapter supports Windows Server
2008, 2003, 2000; Vista and XP operating systems.
Five procedures are described below. Review each
thoroughly to ensure that you are using the one that
best fits your needs.
Note
Windows NT is only supported with Celerity
driver version 1.31 or earlier. If you are using
Windows NT, contact your service
representative.
1 Power on your system.
2 Insert the Installation CD. The installation guide
appears. If the guide does not appear, navigate
to the batch file Autorun on the Installation CD
and click on it.
3 Click on Windows Drivers.
4 Click on Windows x86 Drivers for 32-bit
systems or Windows x64 Drivers for 64-bit
systems. If you do not know which version to
select, contact your system administrator or
refer to your operating system manual.
5 Click on the menu item containing the words
Install Driver for the version of Windows you
are using.
13 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

2 Install Drivers

ATTO Celerity adapters ship with the latest firmware
installed. The Celerity FC Installation CD shipped with
your adapter also contains the latest driver.
The Installation CD automatically starts when inserted
in the system CD-ROM drive. Navigate the easy-to-
use HTML-based menu to find the driver for your
adapter and operating system.
The Celerity FC Installation CD referred to in these
instructions can be the Installation CD shipped with
your adapter, a folder containing the latest
downloaded and expanded driver, or a Celerity FC
installation floppy disk.
6
Windows Vista and Server 2008
1
2
3
If you do not have administrator privileges, you
must enter an administrator user name and
password.
4
5
6
Follow the on-screen instructions to complete
the driver installation.
Log on to Windows as the system
administrator.
Insert the Installation CD, open the folder
containing the latest driver that was
downloaded and expanded, or click on an
ExpressSAS installation floppy disk (refer to
Creating an installation floppy
floppy disk from a download
If you have User Account Control enabled,
you are prompted to grant the installer
permission to continue.
Click the Continue button.
The driver installer launches. Click Install.
A Windows security panel asks you to confirm
that you want to install the driver. Click Install.
Note
If you also select Always trust software
from ATTO Technology Inc., you will not
receive this prompt again.
or Creating a
on page 14).