Install Drivers; Windows Os - ATTO Technology Celerity FC-164E Installation And Operation Manual

Before installing your Celerity adapter, you must configure your system to recognize and use it by installing drivers
for your operating system.
Configure your system to recognize and use your
Celerity adapter by installing drivers for your operating
system.
Note
If you already have one or more Celerity
adapters installed and you are installing
additional adapter(s), you do not need to
perform any of these procedures unless you
are updating a previously installed driver.
Windows
Note
Windows Vista and later may utilize a new
User Account Control Feature. Because of
this there may be additional confirmations
that will need to be performed to properly
install the driver. These confirmations
normally consist of a dialog where the user
has to give Windows permission to perform
an action. If you do not have the correct
privileges during this, you will be prompted
for an actual user name and password. You
may need to contact your system
administrator if you do not have this
information.
Driver Installation
1 Power on your system and log in as the
administrator or a user with proper
administrative privileges.

2 Install Drivers

ATTO Celerity adapters ship with the latest firmware
installed. The Celerity FC Installation CD shipped with
your adapter also contains the latest driver.
The Installation CD automatically starts when inserted
in the system CD-ROM drive. Navigate the easy-to-
use HTML-based menu to find the driver for your
adapter and operating system.
The Celerity FC Installation CD referred to in these
instructions can be the Installation CD shipped with
your adapter, a folder containing the latest
downloaded and expanded driver, a Celerity FC
installation floppy disk, or a USB flash drive.
2
3
4
5
6
Insert the Installation CD. The ATTO
Installation CD guide should appear. If not,
navigate to the root of the CD and run the
AUTORUN.BAT batch file.
Click on Windows Drivers.
Click on Windows XX Driver link based on the
HBA speed (4Gb, 8Gb or 16Gb) and operating
system (x86, x64 or Itanium) in use. If you are
unsure which version you are using, please
contact your system administrator.
Click Install Windows Driver XX next to the
appropriate item to initiate the driver setup
program.
Follow the on-screen instructions to complete
the driver installation.
Note
WHQL Certified Drivers are available for
select Celerity Fibre Channel HBAs. If
available, these drivers will be listed below
the default Windows drivers.
13