Insert Phone Cable; Earcup And Ear Tip Adapters; Probe - Interacoustics Sera Additional Information

Insert phone cable

The insert earphones including the transducer boxes, cables, tubes and adapters can be wiped down with a
damp cloth and a disinfectant wipe after use. Be careful that no fluid enters sensitive areas such as the cable
connections to the transducers or the connector plug.
The insert earphone components should be completely dry before re-use.
The insert earphone tubes should be examined periodically for any cracks in the tubing
•
The tubes and adapters can be replaced if necessary
•

EarCup and ear tip adapters

The insert earphone adapters can be wiped down with a damp cloth or a disinfectant wipe after use if
necessary. Be careful that no fluid enters inside the adapters.
If an ear tip adapter is contaminated with earwax or debris on the inside of the adapter, use the ear tip
adapter cleaning brush to clean the debris out of the adapter, then clean in an ultrasonic bath. Alternatively,
replace the adapter with a new one.
Do not insert the insert earphone ear tip adapter into the patient's ear canal without a disposable ear tip
installed on it.
Do not insert the insert earphone EarCup adapter into the patient's ear canal. It must be inserted into an
EarCup which is then placed around the patient's ear for testing.

Probe

The probe body and cable can be wiped down with a damp cloth or a disinfectant wipe after use if
necessary. Be careful that no fluid enters sensitive areas such as the cable connections or probe body.
D-0114042-D – 2020/03
Sera™ - Additional Information
The probe and cable should be completely dry before re-use.
Page 37