Draining The Internal Water - Interacoustics Aqua Stim Instructions For Use Manual

Aqua Stim Water Irrigator Instructions for Use - US
Caloric test eye movement recording will begin automatically after the irrigator handle's button has been pressed.
During irrigation, the display will show the elapsed test time.
If the irrigation needs to be suddenly aborted, remove the tip from the ear and direct flow into the catch
basin. Press and hold the button on the irrigator handle for 2 seconds. The irrigator will beep, stop the water
flow, and display the standby idle screen.
Ten seconds after the irrigation is complete, water will be pumped from the external tank to get ready for the
next irrigation. The display will read "Filling..." during this operation. You will need to select the Cool or
Warm temperature.
Continue eye movement recording and follow normal caloric testing protocol (e.g. alerting tasks, look for
peak response, test for fixation suppression etc). The irrigator will be automatically set to the next
irrigation's temperature when you select the next irrigation subtest from the drop menu.
Once the final irrigations have been completed, remove the silicone tip and clean the handle tip with Sani-
Cloth wipes.

3.7 Draining the Internal Water

The Aqua Stim holds 300 ml of water internally. Some water will remain inside the irrigator and its tubes
after irrigations. This water must be drained prior to shipment of the irrigator.
You can irrigate using the handle button "press and hold" method. The irrigation will
continue for the predefined duration even if the button is released from "press and hold".
Once the irrigator button has been pushed to begin testing, water will continue to flow until
either the preselected test time is reached or until you hit Stop in the software icon tool bar
.
Page 15