Opening The Console; Closing The Console - KinAn LD1908 User Manual

8 Port /16 Port

Opening the console


Release the release catch;
*Note：The release lock can only do horizontal locking, it can't bear any load.

Pull the LCD panel all the way out until it clicks into place.

Rotate the LCD module all the way back to expose the LCD screen, the LCD
module can be rotated up to108° .

Turn on power switch, KVM will beep twice. The Port LEDs light flashes 4
times, System will prompt to enter username and password

LCD panel is powered on when the power LED is green.

Power on computer or server then power on KVM and you will see green light
on each port.
The factory default password is blank, double click "Enter".


Closing the console


Close the LCD display panel and the power automatically will shut down.

Push the release catch in the direction of the arrow, push the LCD panel all the
way in until it automatically lock up.
2-1.1 unlocking
Best Resolution :
1280x1024@60Hz
2-1.2 rotate angle of the console
2-1.3 password window
Key
AUTO LOCK
2-1.4 open angle of the console
- 3 -
User Manual