Table of Contents
Advertisement
8 Port /16 Port
Installation instruction
1)
Make sure the rack mounting KVM switch has been connected to the ground (①
in the diagram )
Connect KVM switch with the computer according to( ②in the diagram)
2)
3)
Connect power cable to KVM port as shown in(③in the diagram)
4)
Turn on the power, the KVM start to work after power supply(④in the diagram)
Note：1）Connect monitor, USB keyboard and mouse to Console port to connect
another console.（⑤ in the diagram）
Troubleshooting
The KVM console does not work when I connect and use the console for the first time.
Please re-connect the KVM console according to below steps:
1) Disconnect all the signal and power cables connected to KVM.
2) Then power on KVM and you hear the boot indicating sound from the beeper, a
screen automatically pop up for you to enter the user name and password.
3) Type in the correct user name and password, the original password is clicking
"Enter" twice, then the OSD main menu pop up on the screen.
4) Check the KVM console and make sure it can normally switch ports.
5) Connect one server (PC) to one of the KVM ports with signal cable and check port
switching function, check the keyboard and mouse, if they are not working, try to
restart the server (PC).
6) After successfully finishing all above steps, gradually add server (PC) to this
console until meet your need.
- 2 -
User Manual
Advertisement
Table of Contents
