Assembling the Controller
Slide on controller until all spring catches lock in.
Final, check by pulling gently on the controller.
KISS™ Multilead - Disassembling, Assembly
Disassembling and Assembling the Controller
Remove all electrode leads on the distributor. There are 4 spring catches to be opened
for each lead.
First of all lift up 2 spring catches on one side with a pair of pointed tweezers (Caution:
Do not overstretch!) and lift component slightly, then lift up the next 2 spring catches
on the other side and remove component (controller).
Disassembling the Connector PCB and the Connector
Housings
• Remove the CAM-14 mounting unit: To do so, loosen the four screws and carefully
lift off the CAM-14 mounting unit.
• Loosen the fixation screw of the connector PCB and remove connector PCB.
22745010H
Testing instructions for KISS™ and KISS™ Multilead
KISS™ / KISS™ Multilead
27