GE KISS Service Manual page 33

• Widen the end of the air tube (see A on figure 10) by using a suitable tool so that it fits
over the nozzle of the tube connector. Push the air tube over the nozzle. Assemble
the cover and the distributor block. Ensure that the spring catches click into place.
Figure 10
• Slide the two locking plates (A) into the distributor block (see figure 11). Carefully
connect the CAM-14 mounting unit (see figure 3) to the distributor block and
tighten the four screws (see figure 1 and figure 2). Connect all electrode leads
to the distributor.
Figure 11
22745010H
Testing instructions for KISS™ and KISS™ Multilead
KISS™ / KISS™ Multilead
33