Principle, Intended Use; Personnel And Qualification - Union Instruments PMS3000 Translation Of The Original Operating Instructions

Safety instructions

2.2 Principle, intended use

The PMS system is designed to test for leakage and measure pressure in pipes
and plants.
It is intended for use with gas and water supplies, pipelines (long-distance heating,
plant construction) and process technology (chemical industry, process
engineering).
The PMS3000 pressure test kit tests for leaks in gas and water supplies in
accordance with DVGW G469 (A) and W400-2.
The PMS3000 pressure test kit is portable and designed for mobile use outside of
enclosed areas. When closed, the kit meets protection class IP67.
When connecting to pressure lines, observe applicable on-site conduct and safety
regulations.
The PMS3000 is not designed or suitable for use in explosive atmospheres. Tests
may be performed with natural gas.
Observe applicable on-site safety regulations when working with toxic gases.
Any use beyond the above is not considered intended use. The manufacturer is
not liable for damage resulting from unintended use; the owner/operator assumes
all risk.
WARNING
Intended use also includes following these operating instructions. In addition to
the following safety instructions, always observe the safety instructions for
connected accessories.
Additional equipment or accessories not installed, supplied, or manufactured by
Union Instruments GmbH require the approval of Union Instruments GmbH.
Failure to obtain approval will void the warranty.

2.3 Personnel and qualification

Only skilled personnel observing safety regulations may work on the electrical
system and mechanical connections of the pressure test kit.
14 Jul-2020